Field Flatteners, Back Focus

Suggestions, corrections or comments about astronomy / astrophotography books written by Allan Hall
Post Reply
karl.w.lewis
Posts: 7
Joined: Thu Jul 24, 2014 2:59 pm

Field Flatteners, Back Focus

Post by karl.w.lewis » Fri Aug 08, 2014 12:15 pm

My new HOTECH field flattener came with an instruction sheet that indicates that the sensor should be 55 mm back from the flattener. My Nikon SLR claims to have a flange distance of 46.5 mm, which leaves me 8.5 mm to fill.

I haven't even tried hanging the camera on the back of this, yet, but I already know, I don't have an 8.5mm extension tube; and it isn't clear that I can get one. Do I have to head to a machine shop?

Thanks,

Karl



User avatar
AllanHall
Site Admin
Posts: 72
Joined: Sun Jan 27, 2013 10:54 pm
Location: Huntsville, Tx
Contact:

Re: Field Flatteners, Back Focus

Post by AllanHall » Mon Aug 11, 2014 6:19 am

Generally the field flattener attaches to the camera with a T-Ring, this ring can increase the backfocus by up to 10mm. In addition, they sell T-Thread spacers that go between the field flattener and the T-Ring in increments of 10mm, 20mm and 30mm (separately or in a kit with all three sizes). These are available from many places including from Orion.

Allan

Post Reply